---

1. Product Overview

These guitar stands are handcrafted from solid hardwood and designed to safely support and display standard electric and acoustic guitars. Each stand features a gracefully curved neck, a stable weighted base, and a custom head that accommodates both a guitar cradle and a built-in hygrometer for humidity monitoring.

Current wood variants include:

Additional hardwood variants will be introduced as the collection grows. While the structural body follows a consistent design across all variants, the base and head are fully customizable in wood species, grain pattern, and decorative design.

---

2. Overall Dimensions

Dimension	Specification
Overall Height	50"/4.2 ft (Including Wood base & upper head); slight variations when unique designs are applied
Body Curve Width (max)	5.5″ at widest lateral point
Neck Width (upper)	2.2″ at upper neck section
Base Footprint (standard)	12″ × 12″ / 1 ft × 1 ft square
Head Assembly Width (max)	~  6" head (vertical) with ~ 5” fork (horizontal)

Note: Dimensions shown on engineering drawings are in imperial units (inches/feet). All measurements are nominal unless otherwise stated.

---

3. Component Breakdown

3.1  Body / Neck

Attribute	Detail
Profile	Single sweeping curved neck, S-curve form, tapering toward head
Material	Solid hardwood — species per variant, matched to base and head or custom designed
Construction	100% single-piece solid wood, hand-carved stock — no joins or lamination or veneers
Surface Finish	Sanded smooth; final finish per variant (food safe mineral oil & bees-wax)
Structural Role	Primary load-bearing element; transfers guitar weight to base

3.2  Base

Attribute	Detail
Standard Shape	Square
Standard Dimensions	12″ × 12″ (1 ft × 1 ft)
Thickness	1″–2″ depending on design
Material Options	Solid hardwood — species per variant; accent woods for inlay and banding
Pattern / Design	Custom — may include inlay, bookmatched grain, banding, or carved detail
Finish	Hand-applied; matched or contrasting to body finish
Foot Pads	Brass or rubber non-slip pads on underside (all four corners)
Attachment	Precision mechanical joint to body; concealed hardware

3.3  Head Assembly

Attribute	Detail
Maximum Width / Diameter	Less than 6″ in all directions
Material	Solid hardwood — custom species per order
Guitar Cradle	Integrated yoke/hook style; 100% leather padded contact points to protect instrument finish
Hygrometer Mount	Built-in circular recess / mechanical mount for analog or digital hygrometer
Pattern / Design	Custom — triangular, arched, or geometric profile options
Attachment to Neck	Precision-fit mechanical joint; secured with non-corrosive screws at 2 points
Padding Material	100% leather on all guitar contact points

---

4. Materials & Wood Species

All structural components are made from 100% solid hardwood — single-piece carved stock. No MDF, plywood, lamination, or veneered substrates are used in any structural role.

Wood Species	Characteristics
Walnut (Juglans nigra)	Deep chocolate-brown color; straight to wavy grain; excellent workability and stability
Cherry (Prunus serotina)	Warm amber to reddish-brown; fine, uniform grain; darkens with UV exposure over time
Additional Variants	New hardwood species will be added as the collection grows — contact us for availability
Accent Hardwoods	May be used for base inlay, banding, or head decorative elements (e.g., maple, oak, ebony)

Moisture content of all wood stock is kiln-dried to 6–8% EMC before fabrication to minimize seasonal movement.

---

5. Surface Finish

Finish Type	Application & Notes
Food & Pet Safe Oil standard	Tried & True Original — 100% pure linseed-based, zero VOCs, non-toxic; food and pet safe when fully cured; Applied to entire stand (Head, Fork, S-Body & Base)

All finishes are non-toxic when fully cured. Food and pet safe finishes (e.g., Tried & True) are available on request and contain no heavy metals, solvents, or chemical driers. Guitar contact leather is installed after finishing is complete.

---

6. Customization Options

6.1  Base

• Wood species and grain pattern (bookmatched, quarter-sawn, flat-sawn)
• Decorative inlay — contrasting wood strips, geometric marquetry, or corner banding
• Carved relief details on top surface
• Custom engraving (logo, name, or design)
• Non-standard base dimensions available on request

6.2  Head

• Profile shape — triangular (standard), arched, round, or bespoke
• Wood species — same as body or contrasting accent species
• Hygrometer style — analog dial or digital display (opening sized to instrument)
• Cradle style — yoke hook, padded fork, or enclosed cradle
• Leather color — natural, black, or custom

---

7. Guitar Compatibility

Guitar Type	Compatibility
Electric — Solid Body	Full compatibility (Les Paul, Stratocaster, Telecaster profiles)
Electric — Semi-hollow / Hollow Body	Compatible; confirm body width with manufacturer
Acoustic — Dreadnought	Full compatibility
Acoustic — Parlor / Concert	Compatible
Bass Guitar	Compatible; longer neck accommodates headstock height
Classical / Flamenco	Compatible

---

8. Quality Standards & Tolerances

Parameter	Standard
Dimensional Tolerance	±1/16″ on all nominal dimensions unless otherwise specified
Joint Integrity	Non-corrosive screws at 2 points for head and 3 points for base; appropriate adhesive where specified
Surface Flatness (base)	Base underside flat within 1/32″ across full footprint
Stability Test	Stand loaded with 15 lb test weight at cradle; no deflection or creep exceeding 1/8″
Finish Inspection	No drips, fisheyes, or bare spots on any exposed surface
Leather Adhesion	Contact padding remains securely bonded under normal use; no peel or shift other than natural aging

---

9. Packaging & Delivery

• Each stand ships fully assembled unless otherwise requested
• Options to ship "easy to assemble" available for economic shipping charges
• Wrapped in acid-free tissue paper and packed in custom foam-lined box.
• Cradle padding covered with protective sleeve to prevent compression during transit.
• Care card included with maintenance instructions and finish renewal guidance.
• Hygrometer ships installed and calibrated (if included).

---

10. Additional Notes

Because each stand is handcrafted from natural solid wood, minor variations in grain pattern, color, and figure are inherent to the material and are not considered defects. These natural characteristics are part of what makes each piece unique.

Custom orders requiring non-standard dimensions, exotic wood species, or special finish treatments should be confirmed in writing prior to fabrication. Lead times will vary based on current production schedule and material availability.

---

Handcrafted Guitar Stands — Technical Specifications — March 2026